TELESIN 울트라 광각 155 Degree Max 렌즈 Mod GoPro 9 2 보호 커버 GoPro Hero 9 블랙 액션 액세서리
기능
1.Upgraded 최대 hypersmooth, 2.7K 60 깨지지 않는 비디오 안정화, 실행, 명확 하 고 부드러운 이미지 촬영.
2. 매우 넓은 각 155 정도 fov 조경의 넓은 전망. 시야각을 강화하고 분야의 깊이를 개량할 수 있습니다.
3.Horizon lock은 수평선 또는 수직 축에 비디오를 유지합니다. 카메라가 중심에 장착되어 있거나 전체 360 °를 회전하더라도.
4. 최대 Timewarp 동의 지연은 Timewarp 동의 지연 영상을 위해 강화되고 매끄럽게 존재할 수 있습니다.
5. 설치 후 카메라 영웅 9 블랙 지원합니다 방수 5m. 주: 최대 렌즈를 위한 부속품은 수중을 사용하여 방수 perfermance, 이미지 distortion 그림을 일으키는 원인이 될지도 모르다 성분으로 디자인됩니다. 수 중을 사용하지 않는 것이 좋습니다.
6. 설치하고 분해하게 쉬운, 공구는 필요하지 않습니다.
사양
그물 무게: 31.65 그램
크기: 35*35*18mm
보호 캡 무게: 17.7g
지시
1. 그것을 어느 방향에 있는 1 분기 회전 돌아서 HERO10/9 검정 보호 렌즈를 제거하십시오.
2. 장소 최대 렌즈 Mod 이제까지 당신의 사진기의 렌즈 (사진기의 설치 판이 최대 렌즈 Mod 설치 격판덮개의 뒤에 구멍으로 제대로 일렬로 세워지는 것을 확인하십시오).
3. 눌러 1 분기 회전 시계 방향으로 잠금. 카메라 사용하기 전에 최대 렌즈 모드가 제대로 설치되고 밀봉되는지 확인하십시오.
4. 경고: 건조하고 먼지가없는 환경에서 보호, 렌즈를 제거합니다. 최대 렌즈 mod를 설치할 때 유리제 사진기 렌즈를 만지지 마십시오.
제발 주의
1. 카메라는 녹음하기 전에 최대 렌즈 모드에서 있어야합니다. 그렇지 않으면 영상이 왜곡됩니다.
2. 다시 전환하면 최대 렌즈 모드 모드를 탭하는 것을 기억하십시오.
일반. 최대 렌즈 모드 모드에서 일반 렌즈를 사용하면 영상을 왜곡합니다.
3. 큰 보호 모자는 렌즈 덮개로 때 최대 lens. Mod가 당신의 사진기에 설치될 수 있습니다 사용될 수 있습니다. 사용 작은 모자 유지 표준 HERO10/9 블랙 보호 렌즈 안전하고 깨끗한 때 사용하지. 포함되는 청소 천으로 유지 최대 렌즈 Mod 무료 얼룩에서 및.
패키지 목록
1x Max 렌즈 Mod
1x 보호 커버
1x 패키지 상자
TELESIN Ultra-wide Angle 155 Degree Max Lens Mod For GoPro 9 With 2 Protective Covers for GoPro Hero 9 Black Action Accessories
Feature
1.Upgraded max hypersmooth,enhanced anti-shake for stable shooting even in motion.up to 2.7K 60 unbreakable video stabilization,shooting while running,clear and smooth images.
2.Ultra-wide angle 155 degree fov wide view of the landscape.can enhance the viewing angle and improve the depth of field.
3.Horizon lock keeps your videos on the horizontal or vertical axis,even if your camera is mounted off-center or rotates a full 360°.
4.Max Timewarp motion delay can present enhanced and smooth for Timewarp motion delay video.
5.After being installed on the camera for Hero 9 Black,it supports waterproof up to 5m.Note:The accessory for max lens is designed with components that have waterproof perfermance,using it underwater may cause image distortion.it is recommended not to use it underwater.
6.Easy to install and disassemble,no tools are needed.
Specification
Net weight:31.65g
Size:35*35*18mm
Protective cap weight:17.7g
Instruction
1.Remove the HERO10/9 Black protective lens by turning it one quarter turn in either direction.
2.Place Max Lens Mod ever your camera’s lens (make sure that the camera’s mounting plate is properly lined up with the slots on the back of of the Max Lens Mod mounting plate)..
3.Press and rotate one quarter turn clockwise to lock it in. Make sure that Max Lens Mod is properly installed and sealed before using your camera.
4.Warning:Only remove the protective, lens in a dry, dust-free environment. Do not touch the glass camera lens when installing Max Lens Mod.
Please Attention
1.Your camera must be in Max Lens mode before recording, otherwise your footage will be distorted.
2.Remember to tap out of Max Lens Mod mode if you switch back to
the regular lens. Using the regular lens in Max Lens Mod mode will also distort your footage.
3.The large protective cap can be used as a lens cover when Max Lens.Mod is installed on your camera. Use the small cap to keep the standard HERO10/9 Black protective lens safe and clean when you're not using it.Use the included cleaning cloth to keep Max Lens Mod free from smudges and dirt.
Package List
1x Max Lens Mod
1x Protective cover
1x Package box