专用接口对装(如下图)
小贴士:按"Ctrl+F”输入车型即可查找自己的车型对应尺寸(拉动滚动条可查看更多车型)
【使用方法】
1. If your car's wiper arm is plug-type, insert the plug directly into the hole of the wiper holder and tighten it. 2. If the wiper arm of your car is hooked, first attach the attached quick hook seat to the wiper mount, then hook the hook of the wiper arm on the quick hook, tighten it, and install it; it is firm. Detailed step one: Remove the original wiper... Hold down the clip below! Remove... finger click inside! Detailed step 2: Turn the front end of the middle clamp up, it is easy to install... Detailed step three: After inserting the middle clamp, tighten! I heard it slammed into place! Detailed Step 4: Some models have different wiper sizes for the driver's seat and the co-pilot. They are usually long in the driver's seat. The co-pilot is short. Don't pretend to be reversed. Two identical sizes don't matter... Detailed step five: Install the passenger seat wiper! Optimistic about the direction...Finally, let's take a look at the effect of the installation! See if you are reversed! Beveled forward!
【注意事项】一定要看
1、使用雨刮前,请先清洗橡胶片上的所有灰灰。 2、如果挡风玻璃上有油、蜡、污物等异物,先处理干净后使用,否则雨刮片不能正常工作,会缩短使用寿命。 3、在雨中驾驶时喷洒清洗剂以便获得更好的擦拭效果和延长使用寿命。 4、遇到原车雨刮无法拆下时是因长时间使用接口处有些锈死,多用些力就可以取下,或者去4S店帮忙安装也可。