ALL to SDI Scaler Converter VGA/DVI/HDMI signals to SDI output distance up to 100 m(3G-SDI) 200m(HD-SDI)
1. Introduction
The ALL to SDI Scaler Converter allows you to upscale Composite,VGA,DVI,HDMI signals to high definition video of SDI formats (HD-SDI SMPTE 292M or 3G-SDI 424M/425M), then output to both ports at the same time.
2. Features
Ø Supports HDMI, DVI, VGA and Composite Video input signals;
Ø Supports two SDI output simultaneously;
Ø Supports SDI output distance up to 100 meters (3G-SDI), or 200 meters (HD-SDI);
Ø Scales any input signal to the HD-SDI or 3G-SDI output signals;
Ø Supports HDMI input timings: VGA@60 ~ SXGA@60 !#!amp!*! 480i ~1080p@60 Hz;
Ø Supports VGA/DVI input timings: VGA@60 ~19201080@60 Hz;
Ø Supports Composite Video input timings NTSC, PAL,SECAM;
Ø Supports Black screen signal output;
3. Package Contents
Ø ALL to SDI Scaler Converter 1pcs
Ø 12V/2.5A DC power adaptor 1pcs
Ø Operation Manual 1pcs
4. Specification
SDI Transmission Rates 2.970 Gbps, 1.485 GbpsVideo Bandwidth 165 MHzInput Ports 1HDMI (Type A connector),
1DVI with Audio
1x VGA with Audio 1Composite with R/LOutput port 2SDI (HD/3G-SDI),SDI Cable Distance 3G/HD/up to 100/200 meters with BELDEN 1694A cableHDMI Cable Distance Input: 10 m, 8/12-bitInput HDMI Timing Support VGA@60, SVGA@60, XGA@60, SXGA@60, WXGA@60,480i@60,576i@50, 480p@60, 576p@50, 720p@50/60, 1080i@50/60, 1080p@24/25/30/50/60;Input VGA/DVI Timing Support VGA@60, SVGA@60, XGA@60, SXGA@60, WXGA@60,1280x720@60,
19201080@60Input Composite Support NTSC, PAL,SECAMOutput Timing Support SDI: SMPTE 292M (1.485 Gbit/s) !#!amp!*!
SMPTE 424M/425M (2.970 Gbit/s)ESD Protection Human-body Model: 8kV (air-gap discharge) 4kV (contact discharge)Dimensions 110mm (W)288mm (D)32 mm (H)Weight 750 gChassis Material MetalOperating Temperature 0C~40C / 32F ~ 104FStorage temperature -20C~60C / -4F ~ 140FRelative Humidity 20~90% RH (no condensation)Power Consumption 5W
5. Operation and Fuctions
5.1 Front panel
1. INPUT BOTTONS: Press these buttons to select the input source.
2. RESOLUTION BOTTONS: Press these buttons to select the SDI output resolution.
5.2 Rear panel
1. OUTPUT: The two SDI output is where you connect the SDI monitor with SDI cable for input source display.
2. Input: These slot is where you connect the HDMI/DVI/VGA/Composite source output from DVD, PS3,Set-top Box and Note Book.
3. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.
4. ON/OFF: Power ON/OFF.
Connection Diagram