Nintendo Switch Pro Wireless Bluetooth Controller/Switch Game Controller
SWITCH Bluetooth handle operating instructions:
1. Host settings
#1 To connect a Bluetooth controller, the Controller Connection (Bluetooth) option of the host is On, or turn off Flight Mode;
#2 On the main page, select Controllers-!#!gt!*!Change Grip/Order, so that the host is in the state of searching for Bluetooth devices. (This operation is not required for connection back)
#3 Note: If it is difficult for the host to pair the controller, it may be that the host is connected to too many Bluetooth devices, and you need to manually clear the Bluetooth information (System Setting-!#!gt!*!Controllers and Sensors-!#!gt!*!DisConnect Controllers);
2. Handle pairing host
(1) Use a type-c data cable to connect the handle to the USB interface of the host base. When the channel LED is always on, unplug the data cable. The 4 LEDs are in the state of fast running lights. The channel indicator corresponding to the successful connection is always on. .
(2) When the handle is turned off, press and hold the Home button for 5 seconds to turn on the device. The 4 LEDs are in the state of fast running lights, and the channel indicator corresponding to a successful connection is always on. If there is no synchronization within 2.5 minutes, it will automatically sleep.
If the Bluetooth connection is successful, the corresponding channel indicator LED is always on (assigned by the Switch host)
3. Handle back to host
When the handle is turned off, press the HOME button for 1 second to wake up the handle. After being awakened, it will automatically connect to the paired host to reconnect. If the reconnect is unsuccessful in 10 seconds, it will automatically sleep;
Other buttons have no wake-up function
4. Handle shutdown and sleep
Long press the Home button for 5s to turn off the handle;
After the handle is successfully connected, it will automatically enter the sleep state if it is not operated for 5 minutes;
The host screen is off and the handle automatically sleeps
5. Low voltage alarm
If the voltage of the lithium battery is lower than 3.55V±0.1V, the current channel light flashes quickly to indicate that the voltage is low;
If the lithium battery voltage is lower than 3.45V±0.1V, it will automatically sleep;
6. Handle test
Key test: System Setting-!#!gt!*!Controllers and Sensors-!#!gt!*!Test Input Devices
3D test: System Setting-!#!gt!*!Controllers and Sensors-!#!gt!*!Calibrate Control Sticks