QuuBe – Factory Wholesale by Qoo10

Made of fine quality material, practical, easy to install and use, wide application range, has a long service life. Features: Made of fine quality steel, wear resistant, high hardness, has a long service life. Widely used for small devices such as medical equipment, laser engraving machine, etc. DIY installation process can improve your hands-on ability. The motor needs a A4988 driver (not included) to drive, and the motor can not directly connect to the power. The maximum linear speed is 25mm per second. Specifications: Material: steel Color: silver Model: D8-MOTOR80 Rated voltage: 9-12V Thread rod diameter: 3mm / 0.1in Thread rod length: 90mm / 3.5in Slider block stroke: 80mm / 3.1in Drive mode: bipolar drive Thread rod pitch: ±0.5mm / ±0.02in (Moving 0.025mm for one step, can use microstep driver if needs smaller) Drive voltage: 12V DC Current per phase: 800 ma/phase Coil resistance: 15 10%Ω/phase No.of phases: 2 phases Step angle: 18 ./step Excitation method: 1-2 phase excitation Pull-out thrust: 500g above at 125pps Max response frequency: 1600 pps above Max starting frequency: 1100 pps above Insulation class: class E Insulation strength: 100V AC one second Insulation resistance: 50M DC 500V Operating temperature: 0℃~+55℃ Motor surface temperature: 80℃ Item size: 105 * 15mm / 4.1 * 0.6in Item weight: 46g / 1.6ounce Package size: 130 * 35 * 35mm / 5.1 * 1.4 * 1.4in Package weight: 55g / 1.9ounce Note: The motor needs to be driven by the driver, not directly connected to the power. Package list: 1 * Motor with Linear Slide <img src="https://img.tttcdn.com/product/xy/2000/2000/p/gu1/E/1/E5501/E5501-1-3416-eFZu.jpg"><img src="https://img.tttcdn.com/product/xy/2000/2000/p/gu1/E/1/E5501/E5501-1-3416-ROat.jpg"><img src="https://img.tttcdn.com/product/xy/2000/2000/p/gu1/E/1/E5501/E5501-1-3416-aGyM.jpg"><img src="https://img.tttcdn.com/product/xy/2000/2000/p/gu1/E/1/E5501/E5501-1-3416-B9Su.jpg>

12V Stepper Motor Stroke 80mm with Slider Motor for DIY Small Laser Engraving Machine