Wireless SONY CHIP CAMERA FOR FORD MONDEO/FIESTA/FOCUS/S-Max/KUGA
Kindly Take Note: By the 2.4 GHz Wireless Module, no necessary to run the Video Cable inside the Car, less labor work, Simple to install !!!
Please kindly make sure that our product\'s size is same with your car\' s license plate light, because there may have a little difference even for the same style car but in different country.
This camera will replace one of the license plate lights.
For Camera :
Image sensors: 1/4" color sony CCD Chip
TV System: NTSC default
Minimum illumination. !#!lt!*!0.1
AGC: Auto
BLC: Auto
White Balance: Auto
Video Color: Colorful
Effective Pixels : 728x512
Resolution : 520TV lines (Normal CMOS/CCD/CMD camera is 420 TV Lines)
Video Output: 1.0Vp-p,75?
Electronic Shutter: 1/60(NTSC)-1/10000S, 1/50(PAL)-1/10000S
S/N ratio: Better Than 48db
Lens Angle: 170 Degree
Waterproof Class:Ip 68
Operation Temperature: -20°C+80°C RH95%
Storage Temperature: -30°C+80°C
Working Power (DCV): 12
Current consumption: 90mA Max
For Wireless Color Video Transmitter !#!amp!*! Receiver
*100% brand new,High quality
*Easy installation
*Take one minute get your camera become a wireless camera
*Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)
*Work Range:Up to about 50m(Hollowness)
*Connects to rear-view camera and front video screen
*Fit all RCA composite video connections
*Power: DC 12V
*Transmitter/Receiver Cable Length:100CM
Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit.
Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end.
The transmitter also includes a handy pass through for the power so you can connect it inline with your camera.
Wireless transmitter with male phono plug and male 3.5mm power plug for supplying power to the camera.
Wireless receiver with male phono plug for connection to monitor.
Package:
1 x Waterproof Car RearView Backup SONY CCD Camera
1 x 2.4 Ghz Transmitter 1 X 2.4 Receiver
How to Connection:
Installation effectConnection(not included the above LCD monitor):
SONY car camera :
CCD car camear :
cmos car camera :
How to Install:
A.Take out your stock license plate light at the back of your car.
B.Fix the camera to where the stock license plate light was.
C.Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
D.Connect the power of the camera to your car REVERSE lights - red wire to positive and black wire to negative.
E.Connect the video cable of the camera to the extension cord.