120000 Pulses Flashes Lumea PRECISION PLUS IPL Hair Removal Whole Body Bikini Permanent Hair Removal
Features
Women's No 1 choice - 80% of women preferred Lumea to their conventional hair removal method, because it's fast, effective and convenient
Fast - Wider 2-4 cm; application window with new Slide !#!amp!*! Flash mode for even faster application as well as Step !#!amp!*! Flash mode for precision treatment
Effective - Up to 80% reduction in hair regrowth in just 8 weeks; then simply repeat treatment as necessary to prevent re-growth
Specialised - New bikini area attachment improves performance
Convenient - Advanced Salon technology for use at home at a time to suit you. Rechargeable, ready to use, no gels or accessories needed
Versatile - Suitable for body and now for the face too. 5 light energy settings - suitable for most skin tones and hair colours
Application areas
Time Use with confidence to remove hair on all body parts including legs, underarm, bikini area, stomach and arms.
Face: 1 min
Underarms: 1 min per side
Entire bikini area: 4 min
One lower leg: 8 min
One full leg: 15 min
IPL technology
Lumea uses an innovative light-based technology called IPL (Intense Pulsed Light), derived from the technology used in professional beauty salons. has adapted this technology for safe and effective use in the comfort of your own home. worked closely with leading dermatologists to develop this breakthrough hair removal system, together with consumer research involving 2000 women for over 10 years.
Facial attachment for safe facial treatment
The facial attachment has its own specially designed integrated light filter for safe and convenient use on the upper lip, in and sideburns. It can also be used on other sensitive areas on the body, e.g. underarms and other hard-to-reach areas.
Introduction
Light-based hair removal is one of the most effective methods to treat unwanted body hair with longer-lasting results. It is different from current home hair removal methods because it significantly reduces hair regrowth. You can now use this innovative technology comfortably in the privacy of your own home, whenever and wherever you want.
Working principle
- The appliance works by heating up the hair and root beneath the skin. The melanin in the hair and hair root absorbs the released light pulses. The darker the colour of the hair, the more light can be absorbed. This process stimulates the hair to go into the resting phase.
- In between treatments, hair sheds naturally and regrowth is inhibited. Hairs can take one or two weeks to shed.
- Optimal hair removal cannot be obtained with a single session, since only hairs in the growing phase are susceptible to treatment with light. During a treatment, hairs on the treated area are usually in different stages of the hair growth cycle. To effectively treat all hairs you have to repeat the treatment once every two weeks for the first two months.
Do not use the appliance:
1.On/off/intensity button, short press for intensity adjustments, long press for shutting off
2.Light intensity indicator, form 1-5, 5 lights for maximal intensity
3.Charging indicator, flashing indicates charging in progress, steady light means charging ready
4.Skin contact indicator , steady light means acceptable skin contact
5.DC power inlet
6.Ventilation holes
7.flash button Press the flash button to release a flash.
8.Exchangeable flash head
9.Power adaptor
First use and skin test
1 Choose an area close to the area you intend to treat.
2 Press the on/off button to switch on the appliance.
3 Apply one flash at the lowest recommended intensity for your skin type.
4 As long as it feels comfortable (not painful), increase the setting by one level within the recommended range for your skin type and apply one flash for each setting. Do not apply more than one flash on the same spot.
5 After the skin test, wait for 24 hours and check your skin for any reaction. If your skin shows reactions, choose the highest setting that did not result in any skin reaction for subsequent use.
Subsequent use
1 Before every treatment, clean the light exit window.
2 Press the on/off button to switch on the appliance.
Note: It is normal that the appliance and the attachment become warm during use.
3 Start each treatment by selecting the light intensity very carefully, based on your skin’s sensitivity and on how comfortable treatment feels.
4 Press the on/off button to cycle through the 5 intensity settings.
5 Place the appliance at a 90° angle on the skin so that the light exit window is in contact with the skin.
The ‘charge ready indicator’ light on the back of the appliance become a steady green when the device is fully charged, and the Skin contact indicator become steady when good contact with skin is established. This may take a few seconds.
6 Press the flash button to release a flash. Now you have 2 options to release the next flash:
A Keep the flash button pressed. The appliance releases one flash after another as long as the flash head is in full contact with the skin. Immediately after the appliance has flashed, slide the appliance to the next area.
B Let go of the flash button after each flash. For the next flash, place the appliance on the area right next to the previously flashed area.
Note: The visible light produced by the appliance is the reflection of the flash on the skin and is harmless to your eyes. It is not necessary to wear goggles during use.
7 Switch off the appliance after you have finished the treatment.
8 Check the light exit window for hairs and dirt and clean the appliance after use.
How to achieve optimal results
- It is normal that hairs are still visible after the first few treatments
- To remove all hairs successfully and prevent the hair follicle from becoming active again, the treatments have to be repeated once every two weeks for the first two months. Your skin should be smooth by then..
Maintenance phase
- To ensure that your skin stays smooth, we advise you to repeat the treatment every 4 to 8 weeks. The time between treatments may vary based on your individual hair regrowth and also across different body areas. If too many hairs grow back between treatments, simply shorten the treatment interval again, but do not treat any area more often than once every two weeks. When you use the appliance more frequently than recommended, you do not increase the effectiveness but you do increase the risk of skin reactions.
Packing List
1* IPL Epilator device
1* Epilation flash
1* AC Adaptor US plug
1* Safety Glasses
1* User's manual